Animal Surgical Equipment Accessories
Braintree Scientific Rotating Tail Injector, Tube Only - Std, 1 1/4"" ID
Rotating Tail Injector Reduce time and increase productivity on mice tail injections and tattooing! The only mouse restrainer in which the tail can be rotated. This feature provides for easy access to either vein in the tail for an i.v. injection. Animal chamber accommodates mice weighing up to 45g. RTI is ideal to adequately restrain an un-anesthetized animal while having the tail vein straight in line with user's eyes for a successful injection. A pattern of air holes provide ventilation as well as a "toe-hold" for the mice. The unit sits comfortably on a bench top or in a laminar flow hood and it can be U.V. sterilized for use with immune-compromised mice. The raised table top lets user rest their hands to administer the injection. **Sold for research purposes only and not for human use**
Instech High-flow peristaltic pump, universal power adapter. 66:1 motor delivers flow rates from 0.07-18ml/min.
The Instech P720/66 is the high-flow model in the P720 series of compact peristaltic pumps. It delivers the precision of a syringe pump for applications like tissue perfusion and continuous infusion without volume limitations. Unlike lower-flow models, the P720/66 uses a planetary gearhead to manage higher torque requirements for larger tubing and flow rates.
Features
- Type: High-flow miniature peristaltic pump
- Flow Rate Range: 70 µL/min to 18 mL/min (up to 1080 mL/hr)
- Accuracy: Better than ±5% with linear speed control
- Construction: Precision pump head with Swiss motor and planetary gearhead
- Power: Universal 15VDC adapter (does not support battery backup)
- Compatibility: Mates with single and dual-channel P720 tube sets
Instech Continuous flow tubing set for use with push/pull syringe pumps. .062in ID Tygon with valves. Use with HA3009 and HA3008. (610270)
The Harvard HACV062T is a continuous flow tubing set with check valves, designed for use with Harvard Apparatus models HA3009 and HA3008 (PHD Ultra series pumps configured for push/pull operation)push/pull syringe pumps. It allows for continuous, smooth flow during infusion applications.
Features
Instech Low-flow peristaltic pump, 900:1 motor delivers flow rates from 8-2400l/min.
P720 Peristaltic Pumps
Instech P720 peristaltic pumps deliver the low flow rates of syringe pumps without the limits on delivered volume. They are ideal for tissue perfusion and other low-flow laboratory applications.
The 900:1 motor delivers flow rates from 8-2400l/min depending on tube set size installed. Order tube sets separately. Universal power adapter included.
Features
- Precise. Precision-machined pump heads, Swiss-made motor and gearhead assemblies, linear speed control, and a range of tube sizes deliver flow rates from 0.8 µL/min to 18 ml/min (0.05 to 1100 ml/hour) with an accuracy better than ±5%.
- Small. The pumps fit in the palm of your hand and weigh about one pound.
- Versatile. Pre-assembled tube sets are available with your choice of three tubing materials, nine types of connectors, and one or two channels.
Instech Luer stub, 22ga (blue) x 0.25in (6mm), non-sterile, pack of 100
The Instech LS22/6 is a non‑sterile 22‑gauge blue luer stub used for connecting infusion tubing or catheters to syringes or other male luer fittings. It includes a polypropylene hub with a stainless‑steel blunt, deburred tip to prevent tubing damage. LS22/6 is supplied non‑sterile in a pack of 100 for short‑length infusion and sampling workflows.
Features
- Gauge: 22ga (blue hub)
- Length: 0.25 inch (6 mm)
- Connection Type: Female luer for tubing-to-syringe interfaces
- Hub Material: Polypropylene
- Tip Material: Stainless-steel, blunt and deburred
- Sterility: Non-sterile
- Package Configuration: Pack of 100
- Use Case: Infusion and sampling workflows in preclinical research
Instech Syringe rack kit, 4X140 multi-rack for Harvard Apparatus PHD Ultra pumps
The HA3021 (70-3021) is a 4x140 Syringe Multi-Rack Kit for use with Harvard Apparatus PHD ULTRA series syringe pumps.
Features
Complete tubing set for Instech ABS2, 020 silicone, no low loss. For automated blood sampling from rats.
The Instech ABS2/TS020NL is a complete tubing set designed for the ABS2™ Automated Blood Sampler. Built from 020-size silicone tubing in a no–low-loss configuration, it supports accurate automated blood sampling by maintaining reliable fluid flow and minimizing dead volume. This tubing set is optimized for rat studies and integrates directly with ABS2 peristaltic pump pathways for consistent sampling performance.
Features
- Tubing Type: 020 silicone
- Configuration: No low loss
- Application: Automated blood sampling from rats
- Compatibility: ABS2 Automated Blood Sampler
- Function: Maintains steady fluid flow for sampling and IV fluid return
- Quantity: 1 complete tubing set
Instech Luer stub, 23ga (orange) x 0.5in (12mm), non-sterile, pack of 100
The Instech LS23 is a non‑sterile 23‑gauge orange luer stub used for connecting infusion tubing or catheters to syringes or other male luer fittings. It includes a polypropylene hub with a stainless‑steel blunt, deburred tip to prevent tubing damage. LS23 is supplied non‑sterile in a pack of 100 for routine infusion and sampling workflows.
Features
- Gauge: 23ga (orange hub)
- Length: 0.5 inch (12 mm)
- Connection Type: Female luer for tubing-to-syringe interfaces
- Hub Material: Polypropylene
- Tip Material: Stainless-steel, blunt and deburred
- Sterility: Non-sterile
- Package Configuration: Pack of 100
- Use Case: Infusion and sampling workflows in preclinical research
Instech Pump 11 Elite inf/wd programmable dual syringe pump (704505), US cord
Syringe pump, Harvard Apparatus model 11 Elite, infuse/withdraw, programmable, dual syringe. Touch screen interface. US power cord.
Med Vet International Diamond Dental Burr, J0452D8M, Set of 7
Diamond Dental Burrs. Seven. Use with contra angle. Includes handy display tray.
